lol ... who would of thunk it
VIDEO Tutorial :
http://www.getoffmynuts.com/videos/high2/taser.wmv
AT THE END ...THEY TASE ONE OF THERE FRIENDS..
Here's the steps:
You need a knife, scissor, disposiable camara, and a someone that's not likely to beat your ass if they get a little shock.
1.Take the cardbroad cover off the camara, and open the back up buy pushing the release button.
2.Take the film and the battery out, then close it back up.
3.Now take the front case off the camara, by pulling it apart on the oppisite side of the release button for the back, which should expose the systembroad, it green and has aluminum wire printed in it.
4.With scissors cut the wire to the flahs off and the nplace the front case back onto the camara. May sure the three wires are hanging out on the top.
5.Take the pocket knife and cut half way into the wire so that the aluminum wires are revealed.
6.Now place the batter back in and hold down the charge button to start your tasing fun.
VIDEO Tutorial :
http://www.getoffmynuts.com/videos/high2/taser.wmv
AT THE END ...THEY TASE ONE OF THERE FRIENDS..
Here's the steps:
You need a knife, scissor, disposiable camara, and a someone that's not likely to beat your ass if they get a little shock.
1.Take the cardbroad cover off the camara, and open the back up buy pushing the release button.
2.Take the film and the battery out, then close it back up.
3.Now take the front case off the camara, by pulling it apart on the oppisite side of the release button for the back, which should expose the systembroad, it green and has aluminum wire printed in it.
4.With scissors cut the wire to the flahs off and the nplace the front case back onto the camara. May sure the three wires are hanging out on the top.
5.Take the pocket knife and cut half way into the wire so that the aluminum wires are revealed.
6.Now place the batter back in and hold down the charge button to start your tasing fun.
